Are you ready for the IEEE International Symposium on Electromagnetic Compatibility, Signal & Power Integrity (EMC+SIPI)? This year’s event takes place in Phoenix, Arizona, from August 5 – 9, bringing together numerous exhibitors showcasing the latest in EMC, signal integrity and power integrity techniques, and more.
While walking the Phoenix Convention Center, there’s one stop you cannot miss – booth #310 featuring Maury Microwave best-in-class solutions for EMC immunity testing. In this blog post, learn all about the products, leading capabilities, and demonstration that Maury Microwave will showcase at the 2024 EMC+SIPI Symposium.
EMC immunity testing typically involves placing a device under test (DUT) in a controlled test chamber. There, engineers can observe and analyze how devices, systems, or equipment perform under different levels of electromagnetic interference, ensuring the design meets stringent EMC specifications and functions properly in its intended environment.
Amplifiers play a crucial role during this process, tasked with generating power levels strong enough to drive antennas to required field strengths. This ensures the equipment inside the chamber is evaluated appropriately, preserving test accuracy and compliance.
There are several essential parameters to consider when choosing the right amplifier for your test setup, some of which include:
Booth #310 will feature an EMC immunity testing demonstration, showcasing how Maury Microwave amplifiers, power sensors, and interconnects have the performance needed to meet emerging EMC requirements.
How does it work? First, a signal source generates a waveform, which is amplified by the MPA-series amplifier. The LLC-series coupler receives this signal as an input and outputs a portion to a 50-ohm load for termination and another to the RTP5000 series sensor, with signal transmission handled by StabilityPlusTM cable assemblies. In a typical EMC radiated immunity testing environment, the amplifier output would be directed to an antenna, which would test the equipment inside a chamber under different electromagnetic interference levels.
Below is a rundown of key capabilities featured in the demonstration that overcome critical EMC immunity test challenges.
The Maury Microwave tradeshow page – https://info.maurymw.com/emc-sipi-2024 – features more information about the best-in-class solutions and must-see product demonstration in booth #310 at EMC+SIPI 2024.